Guides / Container Shops & Kiosks
A container shop is a fitted retail unit, not a bare box with a window cut into it, and that difference is the whole answer to the cost question. Glass facade, counter, service window, utility routing, canopy and signage panel are configured at the factory and priced against your layout, which is why our product page quotes every configuration as on request rather than publishing a list. This page sets out what is inside the unit, what drives the number, and what a quotation should itemise before you compare two of them.
There is no single price for a container shop, because a container shop is not one product. Our product page prices each configuration against five inputs: the glass facade or display window, the bar and interior fit-out, the signage and canopy, the flooring and electrical specification, and the order quantity. Change any one and the number moves. What the page does publish is the direction of travel — prices follow steel and aluminium material cost — which is why the unit is quoted per project rather than sold from a price list.
What is included is easier to state. A factory-fitted unit arrives with the framed glazing, the counter or bar configuration you specified, the canopy with its signage panel, the flooring and electrical distribution, and the pre-wired points and plumbing stub-outs for the equipment that will go in. It leaves the factory container-loaded so it can be placed on site quickly. The two halves of the question are therefore: what is in the box, and what did you choose about it.
The fastest way to make the price question concrete is to name the format, because the format decides which of the five inputs are doing the work. These are the configurations published on our container shops page.
| Format | Built for | Fit-out that defines it |
|---|---|---|
| Retail Kiosk | Street retail and pop-up sales points | Compact glass-fronted unit, sized around the display frontage |
| F&B Pod | Food and beverage service | Counter, service window and utility routing |
| Coffee Bar | Bar service and coffee retail | Bar fitting with counter, shelving and plumbing points |
| Unmanned Store Pod | Self-service retail | Pre-wired for vending and access-control equipment |
| Two-Storey Commercial Street | Walkable commercial frontage | Stacked, connected units forming a street front |
| Container Bar | Bar and lounge use | Extended counter with an outdoor serving hatch |
Read that table as a list of pricing inputs rather than a product list. A kiosk and a two-storey commercial street are the same construction technique at very different order quantities, which is why the quantity input sits on the same row as the glazing.
Buyers comparing quotes usually find that the difference is not the price of the box, it is which of these items each quotation has assumed. The specifications published on our container shops page list these as the configured items.
The unit size is listed as customizable, and the glass and frame, the canopy, and the electrical and water routing are all listed the same way. That is not a way of avoiding an answer. It is the reason the price has to be quoted: on a fitted unit, the specification is the product.
Our product page names five factors, and each one maps to a decision you control. Work down the list and you can see which of your choices is moving the number before any quote arrives.
| Pricing factor | What determines it |
|---|---|
| Glass facade / display window | Framed glazing area and glass specification |
| Bar & interior fit-out | Counter, shelving and plumbing points |
| Signage & canopy | Canopy size and lightbox or signage fit-out |
| Flooring & electrical | Flooring finish, wiring and outlet count |
| Order quantity | A single unit against a multi-unit street |
The page states each of these as on request, and states the reason on the same page: prices follow steel and aluminium material cost, so the unit is quoted per project and not fixed. Two units that look identical in a photograph can sit on either side of a wide range because of the glass specification and the outlet count alone.
Because the price is configured rather than listed, the useful comparison is not the total at the bottom of two quotations. It is whether the two quotations cover the same items. A quotation built on our format should let you check it line by line against the fit-out above.
One thing to ask for in writing is what the quoted price assumes will happen on site. A container shop arrives factory-fitted and container-loaded for fast placement, but the base it stands on, the connection to mains services and the local approvals are the buyer's side of the line, and a quotation that is silent on them is not a cheaper quotation — it is a shorter one.
Three questions sit next to the cost question, and each is answered elsewhere on this site rather than being estimated here.
How many units travel in one container is quoted per project specification, because it depends on the unit size and the stacking configuration — the container shops page says so directly, and the shipping and unloading guide explains what that packing decision means once the container opens. How long production takes follows the same logic as every other modular order on this site: lead time is quoted per project and counted from deposit and drawing sign-off, which the lead time guide sets out stage by stage. And the floor on a small order comes from the container rather than from a price list, which the MOQ guide explains.
The container shops, kiosks and commercial street page carries the format list, the pricing inputs and the technical specification. The certifications page lists the documents you can request, including the material certificates and packing list that travel with a fitted unit. And the inspection process explains what is checked in-line during production, which is the stage that matters most on a unit whose value is in the fit-out rather than the frame.
Our container shops page does not publish a fixed price, and the reason is stated on the page: the final price is set by the glass facade or display window configuration, the bar and interior fit-out, the signage and canopy, the flooring and electrical specification, and the order quantity. Each of those is priced against your layout, so the price is quoted per project. The page also states the direction of movement, that prices follow steel and aluminium material cost, which is another reason a unit is not sold from a fixed list.
Aluminium framed glazing, the interior fit-out configured for the unit type, a steel-framed canopy with a signage panel, flooring and electrical distribution, and pre-wired points with plumbing stub-outs for the equipment. Electrical components are supplied to the standards and market requirements you specify, with certificates provided in the documentation pack, and the unit is container-loaded for fast site placement.
Interior fit-out is configured per unit type rather than supplied as a standard allowance. Our product page puts the pricing side plainly: itemised pricing is on request based on your equipment list. Sending the equipment list with the enquiry is what turns the fit-out from an assumption into a line on the quotation.
Yes. Window size, split-lite layout and framing colour are customizable to your storefront drawing. Because framed glazing area and glass specification are one of the five pricing inputs, the drawing is also the document that lets the facade be priced rather than estimated.
Container loading quantity is quoted per project specification, depending on unit size and stacking configuration. We do not publish a fixed unit count, because the number is a function of the model, the packed height and the packing layout. The loading plan is therefore prepared against your order and issued with the quotation.
Electrical components are supplied to the standards and market requirements you specify, whether that is CE or the destination-market equivalent, and the certificates are provided with the documentation pack. Naming your market at enquiry stage is what lets the correct standard be quoted first time.
Lead time is quoted per project and counted from deposit and drawing sign-off, the same convention used across our modular range and set out stage by stage in the lead time guide. The drawing has to be agreed before production starts, because the fit-out is built to it, so the drawing and the deposit are the two things in your control that start the clock.
A single unit against a multi-unit street is one of the five pricing inputs on our container shops page, so a single unit is a configuration that can be quoted. The floor on a small order comes from the container rather than from a published minimum, which is the point the MOQ guide explains, and the loading plan issued with your quotation is where the quantity question is answered for your specific order.